Water content determination Litronic-WMS II

Water cut meter / Analyzer
Liebherr sensors in use in explosive areas

The Liebherr Litronic-WMS II water content meter is used to measure the moisture or water content of a wide range of water content of a wide variety of media and materials in refineries, on oil platforms, in pipelines, in tanks, in many applications in the chemical and petrochemical industry, sludge dewatering, drying, waste incineration and sewage treatment plants. Also in the agricultural sector up to the pharmaceutical industry and many other industries.
leftSelectionMarker_Cr3t2PNf87rightSelectionMarker_Di36Mrp5ZG
The wide range of applications extends from the most diverse emulsions to the finest powders and dusts and coarse-grained materials (max. grain size 32 mm) such as

Oil, crude oil, diesel, biodiesel, hardening oil (upstream / downstream)
Coolants
Paints, lacquers, solvents
Wax, resin
Other emulsions, suspensions
Water-product separation
Dust, slag
Fertiliser
Washing powder, agent
Sawdust
Biomass
Flour
etc.

Applications:

Water cut meter
Pipeline, tanks BS&W (Basic sediment and water) measurement
Petroleum purification/desalination
Automatic well testing
LACT units
Separation control

The stand-alone and precise measuring device for water content/moisture determination in the running process guarantees the highest quality and safety in EX-protected production environments, the further processing and refinement of very many emulsions and bulk materials.

The software enables fast and accurate calibration of the measured sections.

Liebherr offers sensors for the following device protection categories:

Certificates

ATEX / UKEX:

EU-type examination certificate number: EPS 21 ATEX 1 140 X / EPS 22 UKEX 1 159 X
DIN EN IEC 60079-0:2018, EN 60079-1:2014, EN 60079-11:2012, EN 60079-26:2015, EN 60079-31:2014
Gas EX-protection:
II 1/2 G Ex db/ia IIC T4 Ga/Gb
Dust EX-protection:
II 1/2 D Ex tb/ia IIIC T135°C Da/Db

IECEx:

Certificate number: IECEx EPS 21.0047X
IEC 60079-0:2017 Edition: 7.0, IEC 60079-1:2014-06 Edition: 7.0,
IEC 60079-11:2011 Edition: 6.0, IEC 60079-26:2014-10 Edition: 3.0,
IEC 60079-31:2013 Edition: 2

Gas EX-protection:

Ex db/ia IIC T4 Ga/Gb
Dust EX-protection:
Ex tb/ia IIIC T135°C Da/Db

In addition to their high precision and robustness, the measuring devices from Bad Schussenried are characterised by their reproducibility.

Once the system has been calibrated, further measuring points can be set up or devices renewed on this basis at any time without great effort. The plant thus always remains reliable, regardless of its previous term and age.